01 Services

Leak detection, workplace risk assessments, and industrial hygiene support

Certified Industrial Hygienist oversight on every project

01 / Find it

Optical Gas Imaging & Leak Detection

Optical gas imaging is used to scan equipment and process areas for emissions that are detectable by the selected camera. The live image helps locate a source and document field observations for follow-up.

A focused leak list can support inspection and repair, reducing avoidable loss of purchased gases and related operating expense.

Technical limitation: Visibility depends on the gas, camera, background, viewing geometry, weather, and operating conditions. OGI does not by itself measure concentration, worker exposure, or leak rate.

Authentic anonymized OGI footage · Original 4:3 aspect ratio

What could gas leaks be costing your plant?

Enter your average monthly usage, choose a gas price, and explore different loss assumptions.

Gas loss scenario inputs

Enter an average across all 12 months. Average monthly purchases are suitable.

Choose an example or enter your unit price. Exclude fixed charges.

Assumed share of purchased gas lost through leaks—not a measured rate.

Annual leak-cost scenario

Enter your monthly usage to see the cost scenarios.

Illustrative cost scenario based on your inputs and selected loss percentage—not a measurement of your facility’s leakage or a guarantee of savings.

Calculation notes and limitations

Example prices and loss percentages are illustrative, not verified rates for your facility. Annual figures assume the entered monthly average continues for 12 months. Not all gas consumption outside the finished product is leakage.

Actual leakage may be zero, lower, or higher. Recoverable savings depend on confirmed losses, repairs, operating conditions, and purchasing terms. This calculator does not determine worker exposure or compliance status.

CO₂ comparison: Assumes a 12-oz can (12 U.S. fluid ounces), 3.5 carbonation volumes, and 1.96 grams CO₂ per liter per volume. Based on UF/IFAS Extension, FS379. Carbonation levels vary by beverage.

Discuss a leak survey

02 / Map it

Concentration Gradient Mapping

Planned, spatial direct-reading measurements can show how a detectable concentration varies across a defined area. Results are tied to the locations, timing, operating state, and conditions present during the survey.

Concentration mapping characterizes spatial variation; it is not a substitute for representative personal exposure monitoring when worker exposure is the question.

Illustrative factory carbon monoxide map with synthetic ppm readings, smooth gradients, and a complete legend
Illustrative factory CO map

03 / Measure it

Industrial Hygiene & Exposure Assessment

Exposure assessments are planned around the work, materials, and routes of exposure present at the facility. Services may include personal air sampling, area measurements, direct-reading surveys, and occupational noise monitoring.

Project scope, sampling methods, and interpretation are developed with Certified Industrial Hygienist oversight.

  • Personal and area air sampling
  • Direct-reading exposure surveys
  • Occupational noise monitoring
  • Exposure-assessment planning and review

OSHA/MSHA Technical Support

Technical support is available for exposure-related OSHA and MSHA matters, including sampling strategy, field data review, and preparation for agency discussions or inspections.

Services are technical in scope and do not constitute legal advice.